CARVE V2
CARVE V2
Wingsurfing is the latest in board sports. Equipped with a wing, a board and a foil, glide noiselessly on the waves or in inaccessible bodies of water for kitesurfing. New sensations are within reach and in complete safety.
Reference:
CARVEV2
Attention: last items in stock!
Wind range and inflation
Wind range and inflation
For a rider weighing 75 kg, average to advanced level
- 6m: 9-20 knots, inflation 7PSI
- 5m: 11-25 knots, inflation 7PSI
- 4m: 14-30 knots, inflation 8PSI
- 3.3m: 17-40 knots, inflation 8PSI
- 2m: 17-40 knots, inflation 8PSI
Features
Features
Wingsurfing is the latest in board sports. Equipped with a wing,
a board and a foil, glide noiselessly on the waves or in
bodies of water inaccessible for kitesurfing. New
sensations are within reach, in complete safety.
CHARACTERISTICS
- 6 Sizes: 2m-3.3m-4m-5m-6m-7.5m
- Optimized design for each surface
- New hydrodynamic profile for a better low range
- Inflatable structure at a single point (one pump)
- Additional rapid deflation valve on the central slat
- TEIJIN TRIPLE ultra-resistant ripstop spinnaker
- Double spinnaker chute
- Only 3 ergonomic handles (2 for the front hand and 1 for the rear hand)
- Delivered with carrying bag and leash
PERFORMANCE:
The wing CARVE V2 is a concentrate of technology. Even if wingsurfing is
a very young sport, we quickly had to discover this sport and
develop a wing not only ideal for a beginner but also
for experts so as not to have to quickly change equipment .
The CARVE is a wing dedicated to lightness and use in downwind and waves. Thanks to its specific dihedral of the inflatable leading edge, the
structure is stiffened, it does not deform in strong wind and power management is immediate. The wind range is the largest with unrivaled control.
The V2 version benefits from a new hydrodynamic profile increasing the rigidity of the wing and thus its low range.
The wing CARVE has a reinforced construction while being very light.
The CARVE is a wing that makes your learning easier, each surface has been
optimized according to the conditions. The positioning of the handles facilitates handling during learning phases. Whatever the
surface, the handles are positioned in the same place, which makes moving from one surface to another intuitive.
The handles are rigid and of moderate diameter for comfortable use even in the middle of winter?
The specific design of the carve gives it very good rigidity even
with inflation pressure recommended 7PSI. This reduces the
effects of aging on the seams of your wing's inflatable structures and increases the responsiveness of the wing.
The lightness of the CARVE as well as its perfect balance in neutral position
(held by the front handle) make it very stable and perfect for
riding the waves or going downwind without worrying about the wing.
Riders who like to surf and ride the waves will be won over by the CARVE, it will push your limits.
STIFFENED FRONT HANDLES
The CARVE was designed with 2 handles for the front hand.
These handles are very close to the leading edge and are not very wide. This choice allows for better control of the wing in transition but also facilitates the transition between holding the wing with the neutralization handle and the navigation handles.
The front handles are more open than the rear handle, this allows
to reduce flexion of the shoulder and elbow when sailing and thus
reduces muscle fatigue.
WIDE REAR HANDLE
The rear handles of the CARVE are specific: they are longer.
In fact, most of the handles are narrow, so as soon as the wind
picks up, holding the handles is difficult, especially since the wing deforms in the gusts. The CARVE has been designed with rear handles that are wider than most other wings on the market, so you simply slide your hand into the handle to improve navigation comfort and control. There is no need to change the handle
for comfort.
LA CARVE thus provides the comfort of a wing with a wishbone (allowing
to move the hands on the wishbone) while having the flexibility of use of the handles.
Finally,
the ZEEKO handle assembly is exclusive and very rigid. Thanks to
this rigidity, the wing is more controllable and reacts immediately to
your commands.
6 SIZES: 2-3.3-4-5-6-7.5
The CARVE is available in 6 sizes to cover all wind conditions.
Each
surface has been given special care and takes into account the
dedicated wind range as well as the constraints due to size.
The 2m is ideal for strong winds but also for learning how to handle it with children.
The 5m will be preferred as a single wing for a rider weighing 70 to 85kg.
For a 2-wing quiver, we recommend:
7.5-5m (+85kg and low wind spots) or 6m-4m (70-85Kg) or 5m-3.3m (less than 70Kg)
Further information
Further information
HARNESS END (option)
Wingsurfing is a sport that will allow you to spend hours on the water . The desire to explore every corner of the body of water quickly becomes irresistible. So after one or two hours of navigation, you
will feel the need to rest your arms. In addition, sailing with a
piece of harness allows better control and more power whether
going upwind or going downhill quickly.
Therefore, the CARVE is equipped with two connectors on the central slat allowing a piece of harness to be connected (available as an option). This
end can be used with all harnesses (windsurfing or kite) and will allow you to extend your riding times.
Sailing with a harness end can deform a wing if it is not has not been
studied for such use. So we worked on the
rigidity of the central batten to allow sailing with a harness
while having maximum control and stiffness.
INFLATION AND DEFLATION VALVES
The CARVE comes with a high-flow inflation and deflation valve.
The entire wing inflates at one point (one pump system) for more
speed. A quick deflation valve has been added to the main
slat to allow very rapid deflation.
HIGH-END CONSTRUCTION
The designer of CARVE has been producing inflatable structures and in particular
kitesurfing for over 20 years. This experience allows us to develop an
optimized construction combining lightness, strength and rigidity.
The best fabrics have been used (Teijin), all seams are reinforced, braided and glued.
The fall of the CARVE has been doubled for better aging.
This results in a lifespan well above average.
CARVE V2
The CARVE is a wing dedicated to lightness and use in downwind and waves. Thanks to its specific dihedral of the inflatable leading edge, the
structure is stiffened, it does not deform in strong wind and power management is immediate. The wind range is the most
important with unrivaled control.
The V2 version benefits from a new hydrodynamic profile increasing the rigidity of the sail and thus its low range.